Steps On How to Overclock Your PC - Expomata

Here is the guide for How to Overclock Your PC Monitor with the help of some tools that will help you to boost the performance of your PC in easy steps. For gamers, overclocking your monitor is effortlessly the most noteworthy thing you can do to help your gaming execution. Follow the below tutorial to proceed.

Overclocking a monitor is extremely straightforward that ought to be utilized as a part of organizations to lessen the clock speed (general revive rate) of a monitor, all together run easily and with no issues on specific PCs. It’s lone as of late where organizations have begun sending out monitor which run somewhat speedier than the typical 60Hz revive rate.

Benefits of Overclock a Monitor

• A higher revive rate (the quantity of picture – or casings a monitor can show for each second) will prompt to a smoother gaming knowledge. This is on account of you will see a lessening of monitor tearing.
• This happens when your design card is yielding a higher invigorate rate than your monitor can do. For instance, while playing Battlefield 4, your representation card may yield 100 casings for every second (fps) which is 100Hz.
• Your monitor is likely constrained to 60Hz (60fps). This outcome in 40 outlines disappearing and makes a “tear” inside the picture that is being shown. The picture beneath (graciousness of Wikipedia) shows what monitor tearing resembles.
• To kill tearing or simply lessen it, you need to attempt to get the most noteworthy revive rate conceivable, and this is the reason you would need to overclock.

Steps to Overclock Your PC Monitor

1. Install the AMD/ATI Pixel Clock Patcher, which will patch your video drivers to unlock higher refresh rates for your monitor.
2. When you run it, it should detect your graphics card, then ask if you want to “Patch found values.” Say Yes, and it should tell you the values have been patched successfully after a couple of seconds.
3. Next, install ToastyX’s custom Resolution Utility (CRU), which will allow you to set your monitor refresh rates. (And resolutions, though we’re not focusing on that stuff today, so don’t tinker with it unless you know what you’re doing!)
4. Once you’ve installed CRU, open it and select your monitor from the drop-down menu at the top-left.

   
   How to Overclock Your PC Monitor

5. Next, click “Add” under the “Detailed resolutions” box, and in the new window change the number of the refresh rate to something a bit higher than your current one.
6. The recommended increasing bit is 10hz or so. (If it works well, you can increase it by another 10hz after rebooting your PC, then another, and pretty much keep going until you encounter instability, at which point you can decrease it again to a more stable refresh rate.) So here, the refresh rate increased from 60hz to 75hz.
7. Click OK, then click the upwards arrow under the “Detailed resolutions” box to make it your first-choice resolution.

   How to Overclock Your PC Monitor

8. Reboot your PC, and it should be running in the new resolution. Remember, if you see a strange visual unstable performance at a given refresh rate, decrease it to something lower by editing it in CRU.

Testing Your New Refresh Rate:

1. To test out your fancy new refresh rate, you can use the motion test tools at Blurbusters. There, look at moving images corresponding to several frame-rates, including the one you’ve just overclocked to.
2. You should see that the highest “fps” image moves most smoothly, and if the tests don’t detect any frame skips, you’ll get a big green “VALID” indicator at the bottom of the monitor.
3. If you do get frame skips, just go back to CRU and lower the refresh rate by increments of 1hz, reboot your PC, and test it again until it’s stable.
4. Upping the refresh rate can also have a negative effect on the brightness and colors of your display.
5. To fix these things, go to “Radeon Settings -> Preferences ->Radeon Additional Settings -> Display Color” then adjust the Saturation, Brightness, and Contrast to make your monitor display appear how you want it.

For gamers, overclocking your monitor is effortlessly the most noteworthy thing you can do to help your gaming execution without spending a penny (unless you need to mercifully give to the general population behind the CRU and Pixel Clock Patcher). It’s something you should be watchful with, notwithstanding, and I push again that if you have any execution issues in the wake of doing this, pare back to bring down revive rates or else you chance to harm your monitor.